DERBY DRIVE over ALTON ROAD
Map
Coordinates:
+33.56667, -86.6333333°34'00" N, 86°37'60" W
Source: National Bridge Inventory (2010 edition)
Information not verified. Use at your own risk.
Facts
| Name: | DERBY DRIVE over ALTON ROAD |
| Structure number: | 018288 |
| Location: | DERBY DR & ALTON RD @I459 |
| Purpose: | Carries highway over railroad |
| Route classification: | Local (Urban) [19] |
| Length of largest span: | 60.0 ft. [18.3 m] |
| Total length: | 142.1 ft. [43.3 m] |
| Roadway width between curbs: | 84.0 ft. [25.6 m] |
| Deck width edge-to-edge: | 86.6 ft. [26.4 m] |
| Vertical clearance below bridge: | 18.0 ft. [5.5 m] |
| Skew angle: | 5° |
| Owner: | City or Municipal Highway Agency [04] |
| Year built: | 1993 |
| Historic significance: | Bridge is not eligible for the National Register of Historic Places [5] |
| Design load: | MS 18 / HS 20 [5] |
| Number of main spans: | 3 |
| Main spans material: | Steel [3] |
| Main spans design: | Stringer/Multi-beam or girder [02] |
| Deck type: | Concrete Cast-in-Place [1] |
| Wearing surface: | Monolithic Concrete (concurrently placed with structural deck) [1] |
2010 Inspection
| Status: | Open, no restriction [A] |
| Average daily traffic: | 2,000 [as of 2004] |
| Truck traffic: | 5% of total traffic |
| Deck condition: | Very Good [8 out of 9] |
| Superstructure condition: | Good [7 out of 9] |
| Substructure condition: | Good [7 out of 9] |
| Scour condition: | Bridge not over waterway. [N] |
| Operating rating: | 47.9 tons [43.5 metric tons] |
| Inventory rating: | 36.0 tons [32.7 metric tons] |
| Sufficiency rating: | 98.5 |
| Estimated cost of work: | $4,724,000 |