US 36 E over BRUSH CR

Map

Coordinates:
+39.75987, -92.80371
39°45'36" N, 92°48'13" W

Source: National Bridge Inventory (2010 edition)
Information not verified. Use at your own risk.

Name:	US 36 E over BRUSH CR
Structure number:	4824
Location:	S 9 T 57 N R 17 W
Purpose:	Carries highway over waterway
Route classification:	Principal Arterial - Other (Rural) `[02]`
Length of largest span:	62.0 ft. `[18.9 m]`
Total length:	169.0 ft. `[51.5 m]`
Roadway width between curbs:	28.9 ft. `[8.8 m]`
Deck width edge-to-edge:	31.5 ft. `[9.6 m]`
Skew angle:	7°
Owner:	State Highway Agency `[01]`
Year built:	1957
Year reconstructed:	1994
Historic significance:	Bridge is not eligible for the National Register of Historic Places `[5]`
Design load:	M 18 / H 20 `[4]`
Number of main spans:	3
Main spans material:	Steel continuous `[4]`
Main spans design:	Stringer/Multi-beam or girder `[02]`
Deck type:	Concrete Cast-in-Place `[1]`
Wearing surface:	Other `[9]`

Status:	Open, no restriction `[A]`
Average daily traffic:	3,320 `[as of 2009]`
Truck traffic:	19% of total traffic
Deck condition:	Good `[7 out of 9]`
Superstructure condition:	Good `[7 out of 9]`
Substructure condition:	Good `[7 out of 9]`
Channel protection:	Bank is beginning to slump. River control devices and embankment protection have widespread minor damage. There is minor stream bed movement evident. Debris is restricting the channel slightly. `[6]`
Scour condition:	Bridge foundations determined to be stable for the assessed or calculated scour condition. `[8]`
Operating rating:	45.1 tons `[41.0 metric tons]`
Inventory rating:	26.4 tons `[24.0 metric tons]`
Evaluation:	Functionally obsolete `[2]`
Sufficiency rating:	72.6
Recommended work:	Bridge rehabilitation because of general structure deterioration or inadequate strength. `[35]`
Estimated cost of work:	$757,000