BIRMINGHAM BR over PKWY E,RP T,TRAIL,2ND AV

Map 

Facts 

Name:	BIRMINGHAM BR over PKWY E,RP T,TRAIL,2ND AV
Structure number:	022085001022480
Location:	BIRMINGHAM BR APPROACH
Purpose:	Carries highway and pedestrian walkway over highway and railroad
Route classification:	Other Principal Arterial (Urban) [14]
Length of largest span:	186.0 ft. [56.7 m]
Total length:	1085.0 ft. [330.7 m]
Roadway width between curbs:	76.1 ft. [23.2 m]
Deck width edge-to-edge:	80.7 ft. [24.6 m]
Vertical clearance below bridge:	13.1 ft. [4.0 m]
Owner:	State Highway Agency [01]
Year built:	1976
Historic significance:	Bridge is not eligible for the National Register of Historic Places [5]
Design load:	M 13.5 / H 15 [2]
Number of main spans:	7
Main spans material:	Steel continuous [4]
Main spans design:	Stringer/Multi-beam or girder [02]
Deck type:	Concrete Cast-in-Place [1]
Wearing surface:	Monolithic Concrete (concurrently placed with structural deck) [1]

2010 Inspection 

Status:	Open, would be posted or closed except for temporary shoring [D]
Average daily traffic:	11,057 [as of 2010]
Truck traffic:	4% of total traffic
Deck condition:	Good [7 out of 9]
Superstructure condition:	Poor [4 out of 9]
Substructure condition:	Fair [5 out of 9]
Scour condition:	Bridge not over waterway. [N]
Operating rating:	79.9 tons [72.6 metric tons]
Inventory rating:	47.9 tons [43.5 metric tons]
Evaluation:	Structurally deficient [1]
Sufficiency rating:	54.8
Recommended work:	Bridge rehabilitation because of general structure deterioration or inadequate strength. [35]
Estimated cost of work:	$10,000

2000 Inspection 

Average daily traffic:	123,193 [as of 2000]
Evaluation:	Not applicable [N]

Comments